# Switch from OneLink.to in one sitting

Updated: 2026-11-05

Jumper.to gives you what you use OneLink.to for: one link that sends iPhones to the App Store and Android phones to Google Play. It also gives you a separate link for every channel, so App Store Connect and Play Console show which channel brought each install. Make all the new links in one batch, then let ChatGPT, Claude or Gemini swap every onelink.to link in your bios and posts with the prompt this page builds.

## Why OneLink.to users switch to Jumper.to

One link per channel, and the stores count the installs from each. A rescue page gets people out of Instagram’s and TikTok’s in-app browsers (see the test results). We host your privacy policy, terms and support page on the same link. 10 links cost $10 a year, with unlimited taps.

- [Installs per channel](https://jumper.to/track-app-installs-by-channel)
- [Tested in 10 apps](https://jumper.to/status/in-app-browsers)

## Before you start

Your old links look like onelink.to/yourapp, or they sit on your own domain if you added one to OneLink.to.

Copy your links from the My Onelinks page in your OneLink.to account. Each Onelink you copy becomes one line in step 2.

If one Onelink sits in several places, list it once per place in step 2, with where it’s posted, so each place gets its own new link and its own count.

### What to do with each old link

Where your old links are, and what to do with each.

| Where the old link is | What to do |
| --- | --- |
| YouTube descriptions, bios and posts | Swap it with the prompt in step 2. |
| Your website and email signature | Swap it by hand or with the prompt: it is one place each. |
| Ads | Change the destination URL in your ad account. |
| Printed QR codes | Switch at the next print run. The Jumper.to QR code keeps working when you change where it points. You print it once. |

One new link per place keeps the taps of each channel apart.

## Leave OneLink.to in three steps

1. **Make your new links.** One Jumper.to link for each old link, for the same channel. “Pick channels” on your app’s page creates them all in one go.
2. **Swap them in.** Paste old and new links into the form below. It builds one prompt that rewrites your YouTube descriptions, bios and posts with the new links and changes nothing else.
3. **Check.** Tap each new link on a phone, scan any new QR code, and watch the taps arrive on each link’s stats.

## Step 1: make your new links

Signed in, open your app and choose Pick channels. On “Create links for channels”, tick the places you post, such as your YouTube descriptions, your Instagram bio and your TikTok bio, and create every link in one go. Jumper.to then gives you the new links to copy as a list or download as a CSV file, ready for step 2.

New to Jumper.to? Paste your App Store or Google Play link at the top of this page to make your first link and your account. Your first 3 links are free, every year. No credit card.

- [Your apps: Pick channels (sign in)](https://app.jumper.to/apps)
- [New here? Make your first link](https://app.jumper.to/new)

## Step 2: swap them in with an AI prompt

Paste your old links, one per line, and your new links in the same order. Or drop the CSV file you downloaded after creating the links into the new links box: its channel column lets the form match by channel when your old lines say where each link is posted. Tick where your links are posted.

You get the old → new table first, with a warning for every line that has no partner, appears twice or isn’t a link. Nothing is matched by guesswork. Then you get one prompt to copy into ChatGPT, Claude or Gemini, with no plugin or extra tool. The form runs in your browser: nothing you type is sent or stored, and it needs no account.

- [If the form doesn’t load, use the prompt template](https://jumper.to/migrate#the-prompt-word-for-word)

## Step 3: check every link

- Tap each new link on an iPhone and on an Android phone: the App Store and Google Play should open on your app.
- If you post on Instagram or TikTok, tap the link inside the app too, where most taps happen.
- Scan every new QR code with a phone camera before you print it.
- Open the link’s stats in your dashboard: taps show up per link within a few minutes.

## Make your new links

Paste your App Store or Google Play link to start.

Your App Store or Google Play link: [Get my free link](https://app.jumper.to/new)

- Your first 3 links are free, every year.
- Nothing to install in your app
- No credit card

[No store link yet? Start with a page](https://app.jumper.to/new)

## Sources

1. [Onelink.to: View all support questions](https://www.onelink.to/faq-all-pages) (onelink.to)

## Related

- [All switching guides](https://jumper.to/migrate)
- [OneLink.to alternative](https://jumper.to/onelink-to-alternative)
- [App links for YouTube](https://jumper.to/youtube-app-link)
- [Jumper.to pricing](https://jumper.to/pricing)

## Questions

### Will my old links stop working?

Not because of this guide: nothing here touches your OneLink.to account. OneLink.to’s help says a Onelink you delete stops working, so keep the old ones until the new links are in every post and on every print run.

### Do I lose my stats?

Your old numbers stay in your OneLink.to account. The new links count from their first tap, per link and so per channel, and App Store Connect and Google Play Console can show installs per channel too.

### How long does it take?

One sitting. The new links take a few minutes, because Pick channels makes a link for every channel at once. After that, each description or bio is paste, copy back and save: roughly a minute per text.

### Can the AI break my descriptions?

The prompt tells it to change only links that exactly match your table and to keep every other character. It also makes the AI list every link it changed, so you can check each text in seconds before you save. If anything else changed, paste the original again.

### Is anything I paste sent to Jumper.to?

No. The form builds the prompt in your browser, and nothing is sent or stored. What you paste into ChatGPT, Claude or Gemini is between you and that service.

### What does it cost?

The guide and the prompt are free. Your first 3 links are free, every year. After that, a link costs $2 a year, 10 for $10, or 100 for $20.

### Is Jumper.to a OneLink.to replacement?

Yes. A Jumper.to link and QR code sends iPhones to the App Store and Android phones to Google Play, as a Onelink does. Every channel gets its own link with campaign tags at no extra cost, and Jumper.to’s page gets people out of Instagram’s and TikTok’s in-app browsers.

Published 5 Nov 2026 · Last updated 5 Nov 2026